Ga door naar hoofdinhoud
Help
Bewerken van stap 9 —

Stap type:

Sleep om te herschikken

Remove 14 retaining screws from back

The first 9 are required for bezel and touchpad removal .

M2 × 14 mm, wafer-head, nylon-coated (6)

M2 × 3 mm, wafer-head, nylon-coated (3)

The remaining need to be removed for base cover removal

M2 × 5 mm, wafer-head, nylon-coated (4)

M2 × 10 mm, wafer-head, nylon-coated (1)

Note: The FPC cable is attached on the underside of the keyboard bezel assembly. In some models, the Bluetooth daughter card is also attached on the underside of the keyboard bezel assembly.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.