Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 11 —

Stap type:

Sleep om te herschikken

This screw came pre-screwed-up. We're beginning to think that our 360 E's assemblers chose expediency over error elimination.

The Torx screws in the metal frame are reluctant to let go, so we grab the extension from our 54 bit driver kit and use it to activate high-torque driver mode.

With the final component of the outer case out of the way, we get to the really good stuff at last.

Inspection at a macro level reveals no major changes. We'll have to see what happens if we go deeper.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.