Ga door naar hoofdinhoud
Bewerken van stap 4 —

Stap type:

Sleep om te herschikken

Be very gentle with the LCD in the next 2 steps! It is glued to the logic board with black stick pads. Do not break the cable/clip!

Adhesive Pads

Cable Clip

Insert flat end of plastic spudger on the bottom of the LCD. Pry gently upwards.

Bottom of LCD

Insert on the sides and continue to pry.

Finally insert on the top and pry.

Top of LCD

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.