Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 8 —

Stap type:

Sleep om te herschikken

These two screws hold the logic board.

When removing the board, be careful about some remaining ribbon cables.

The board is out!

On one side we see the AD80080A chip from Analog devices responsible for capturing the analog signal from the CCD

On the other side, we see the Sony "Real Imaging Processor" that converts raw photo data into nice and human-viewable .jpg files.

The analog cable connecting the CCD to the logic board is screened with some pieces of metal to reduce noise.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.