Ga door naar hoofdinhoud
Help
Bewerken van stap 11 —

Stap type:

Sleep om te herschikken

Remember that shockingly pesky flash capacitor that you (hopefully) avoided contact with before? That's it, just to the left of the lens assembly. You'll want to avoid touching it if possible since the leads are exposed beneath the white plastic tape.

Using a plastic spudger, carefully lift up the black foam tape which covers the capacitor leads.

Once the pink and blue wires are free, carefully lift the capacitor housing out of the way and set it above the rest of the camera. It will still be attached to the camera but is at least out of the way.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.