Gereedschappen die in deze demontage worden gebruikt

Inleiding

This guide will walk you through the steps to completely disassemble a Sprint Airave.

Deze demontage is geen reparatiehandleiding. Om je Sprint Airave SCS-26UC2 te repareren, gebruik onze reparatiehandleidingen.

Remove the external antenna, GPS cover, and GPS module. Remove the external antenna, GPS cover, and GPS module. Remove the external antenna, GPS cover, and GPS module.
  • Remove the external antenna, GPS cover, and GPS module.

Voeg opmerking toe

Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off. Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off. Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off.
  • Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off.

Voeg opmerking toe

Locate and remove the four Phillips screws
  • Locate and remove the four Phillips screws

Voeg opmerking toe

With the cover removed you now have access to the circuit board.
  • With the cover removed you now have access to the circuit board.

Voeg opmerking toe

Using an 8mm socket you can remove the antenna pigtail.
  • Using an 8mm socket you can remove the antenna pigtail.

Voeg opmerking toe

Release the clip indicate to remove the circuit board.
  • Release the clip indicate to remove the circuit board.

Voeg opmerking toe

Here is the circuit board fully removed. Here is the circuit board fully removed.
  • Here is the circuit board fully removed.

Voeg opmerking toe

Erik Leonard

Lid sinds: 11-06-11

164 reputatie

1 Handleiding geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 10

Altijd: 2,979