Ga door naar hoofdinhoud

Gereedschappen die in deze demontage worden gebruikt

Inleiding

Just wanna see how this panda make his sound?

Deze demontage is geen reparatiehandleiding. Om je Speakal iPanda te repareren, gebruik onze reparatiehandleidingen.

  1. The happy Panda
    • The happy Panda

  2. Flip it to find the screws. Unscrew the four Phillips #0 screws. Unscrew the four Phillips #0 screws.
    • Flip it to find the screws.

    • Unscrew the four Phillips #0 screws.

  3. Be careful with the cables of the subwoofer. Be careful with the cables of the subwoofer.
    • Be careful with the cables of the subwoofer.

  4. He look like this on his insides. there is a little lock on the sides.
    • He look like this on his insides.

    • there is a little lock on the sides.

    • Don't forget these screws too.

  5. Opening the sandwich. Don't forget the cables!
    • Opening the sandwich.

    • Don't forget the cables!

  6. It doens't look like a panda anymore. It doens't look like a panda anymore. It doens't look like a panda anymore.
    • It doens't look like a panda anymore.

  7. Removing the board, it's all done.
    • Removing the board, it's all done.

  8. Poor panda... Poor panda...
    • Poor panda...

paulostool

Lid sinds: 06-06-11

121 Reputatie

1 Handleiding geschreven

Hi!

I have just wondered about tweeter type.

I have a pig, bud one of it's tweeters is dead.

Do you have any idea how to get a replacement tweeter?

THX!!

sonofhoegaarden - Antwoord

Hello All,

Please can you assist me with sourcing a amplifier board for the Shox Panda as above in the panda tear down. My panda is supplying 12 Vots DC to the woofer. Thanks very much.

Peter Boucher - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 3

Altijd: 4,534