Ga door naar hoofdinhoud

Wat je nodig hebt

Deze demontage is geen reparatiehandleiding. Om je Table Lamp te repareren, gebruik onze reparatiehandleidingen.

  1. Portable Luminaries Lamp Teardown, Portable Luminaries Lamp Teardown: stap 1, afbeelding 1 van 1
    • The attached picture displays the lamp before the teardown.

  2. Portable Luminaries Lamp Teardown: stap 2, afbeelding 1 van 1
    • Remove the power cord from the wall socket outlet

    • Make sure to follow this step. There may be a danger of severe electric shock if you proceed to tear down the device without removing the plug

  3. Portable Luminaries Lamp Teardown: stap 3, afbeelding 1 van 2 Portable Luminaries Lamp Teardown: stap 3, afbeelding 2 van 2
    • Place the lamp gently on its side on a flat surface

    • Twist the lightbulb counter-clockwise to remove it from the lamp's head.

    • After lightbulb removal, the component attaching the lightbulb and lamp's head is exposed.

  4. Portable Luminaries Lamp Teardown: stap 4, afbeelding 1 van 2 Portable Luminaries Lamp Teardown: stap 4, afbeelding 2 van 2
    • Next, the light bulb housing can be detached from the lamp head

    • Using the Philips screw driver, unscrew the two 5mm diameter screws within the light bulb housing

  5. Portable Luminaries Lamp Teardown: stap 5, afbeelding 1 van 2 Portable Luminaries Lamp Teardown: stap 5, afbeelding 2 van 2
    • Keep the lamp on its side

    • The bottom is now exposed and two screws are visible

    • Using the Philips Screwdriver, unscrew the two 7mm gold screws from the bottom of the base

  6. Portable Luminaries Lamp Teardown: stap 6, afbeelding 1 van 2 Portable Luminaries Lamp Teardown: stap 6, afbeelding 2 van 2
    • Once the screws attached to the base are removed, the base's bottom lid detaches from the lamp.

    • Within the base resides two components: the lamp's weight and the switch.

    • The weight sits on the bottom base lid, so it separates without the use of additional tools.

  7. Portable Luminaries Lamp Teardown: stap 7, afbeelding 1 van 1
    • The white container holding the switch does not need tools for opening.

    • The switch container is clipped shut and opens by unlatching the tab

Brenden

Lid sinds: 11/17/14

56 Reputatie

1 Handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 15

Altijd: 1,656