Inleiding

PlayStation 3 super slim - how to fully disassemble.

You can see also: PlayStation 3 Super Slim Teardown


Please SUBSCRIBE to my channel ツ

Video overzicht

  1. Remove the three rubber feet, warranty sticker and four screws.
    • Remove the three rubber feet, warranty sticker and four screws.

    • Gently pull up on the bottom cover to remove it.

    Voeg opmerking toe

  2. Slide the HDD cover toward the rear of the device to remove it.
    • Slide the HDD cover toward the rear of the device to remove it.

    • Remove the blue screw shown to remove the HDD caddy.

    Voeg opmerking toe

    • Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it.

    Voeg opmerking toe

    • Repeat step 3 for the front top finisher.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Remove the two screws indicated in the disk reader.

    • Remove the five screws shown around the edge of the top cover.

    • Lift the top cover up to remove it.

    Voeg opmerking toe

    • Move the optical disk reader assembly to the left to expose one of the screws holding the power supply in.

    • Remove the two screws indicated and carefully disconnect the cable on the right side of the power supply.

    • Lift the power supply up to remove it.

    Voeg opmerking toe

    • Carefully disconnect the ribbon cables indicated.

    • Lift the optical disk reader up to remove it.

    • Disconnect and remove the white cable and ribbon cable indicated.

    Voeg opmerking toe

    • Remove the seven screws indicated.

    • Lift the motherboard assembly up out of the lower half of the case to remove it.

    • Carefully disconnect the Wi-Fi antenna cables and fan connector indicated by red arrows.

    Voeg opmerking toe

    • Remove the six screws indicated to separate the heatsink and shield from the motherboard.

    good job you just broke the ps3 super slim

    korvanjundskyrim - Antwoord

  4. Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

18 andere personen hebben deze handleiding voltooid.

ZFix

Lid sinds: 09-12-13

160.257 Reputatie

304 handleidingen geschreven

Team

Master Techs Lid van Master Techs

Community

279 Leden

758 handleidingen geschreven

What's the name of the screwdriver that undo's the star shaped screws?

themasterassassin8787 - Antwoord

It is a T8 Torx screwdriver! I'll add the tools to this guide =)

Sam Lionheart -

i took apart my ps3 super slim and put it back together but there is no power what so ever no red light at all

pastorjon.m - Antwoord

One thing to pay attention to: The T8 Torx screws (at least on my 500GB model) are Tamper Proof TR8 screws, meaning you need a special screwdriver to undo them. A normal T8 wont work.

Wesley V - Antwoord

Step 4: “simply remove the front finisher” - are you kidding me? I nearly broke mine!

versluis2000 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 22

Afgelopen 7 Dagen: 147

Afgelopen 30 Dagen: 699

Altijd: 30,116