Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Gereedschappen die in deze demontage worden gebruikt

Deze demontage is geen reparatiehandleiding. Om je Pac-Man Connect and Play te repareren, gebruik onze reparatiehandleidingen.

  1. I start by flipping over the device. I start by flipping over the device.
    • I start by flipping over the device.

  2. I remove 5 Phillips head screws for the case And one more to remove the batteries And one more to remove the batteries
    • I remove 5 Phillips head screws for the case

    • And one more to remove the batteries

  3. Inside, all I see are glorious Phillips Head screws! Finally! Something repairable!
    • Inside, all I see are glorious Phillips Head screws!

    • Finally! Something repairable!

    • Battery Compartment

    • Power Switch and LED board

    • Mainboard/Joystick board

    • A and B button board

  4. I start with the buttons. I start with the buttons.
    • I start with the buttons.

  5. SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits

    SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits
  6. They were very, very easy to get to and remove.
    • They were very, very easy to get to and remove.

  7. Now, for the mainboard. 2 screws get me underneath. But, what's this?
    • Now, for the mainboard.

    • 2 screws get me underneath.

    • But, what's this?

  8. Another 4 screws, and POP! it is holding a spring down, for the joystick. There did not appear to be an easy way to get the joystick out, however. There did not appear to be an easy way to get the joystick out, however.
    • Another 4 screws, and POP! it is holding a spring down, for the joystick.

    • There did not appear to be an easy way to get the joystick out, however.

  9. Finally, I see a power regulator? Finally, I see a power regulator?
    • Finally, I see a power regulator?

  10. Nope! It's just the power switch and LED. Nope! It's just the power switch and LED.
    • Nope! It's just the power switch and LED.

  11. Back Main PCB IC Identification:
    • Back Main PCB IC Identification:

    • You may need to enlarge it to view the text.

  12. In conclusion, I LOVE how it's all the J1 Phillips Head screw, throughout the entire device. It's easy to get under every board.
    • In conclusion, I LOVE how it's all the J1 Phillips Head screw, throughout the entire device.

    • It's easy to get under every board.

    • There are, unfortunately, no plugs, and so everything is soldered on. This removes the possibility of replacing any electrical internals.

Levi G

Lid sinds: 13-07-18

2.675 Reputatie

20 handleidingen geschreven

Één commentaar

It should not be too hard to replace stuff as long as you know how to solder. However many chips cannot be replaced as they are either epoxied on or need to be programmed before it would work in the device.

Chunglin Chin - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 10

Altijd: 305