Skip to main content

Gereedschappen die in deze demontage worden gebruikt

Inleiding

In this tutorial, I will show you how to disassemble the Nokia 3210.

Deze demontage is geen reparatiehandleiding. Om je Nokia 3210 te repareren, gebruik onze reparatiehandleidingen.

  1. Remove Battery cover, battery and SIM Card.
    • Remove Battery cover, battery and SIM Card.

  2. Remove the antenna with your fingers.
    • Remove the antenna with your fingers.

  3. Remove these screws. These are Torx T6. You'll need this screwdriver to remove them.
    • Remove these screws. These are Torx T6. You'll need this screwdriver to remove them.

  4. MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now

    MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now
  5. If you remove the plate, you can see the Motherboard. Remove the Motherboard with a small flathead screwdriver or a spudger. (A spudger is recommended).
    • If you remove the plate, you can see the Motherboard. Remove the Motherboard with a small flathead screwdriver or a spudger. (A spudger is recommended).

  6. Here's the PCB with removed EMI shields.
    • Here's the PCB with removed EMI shields.

    • CCONT NMP70467 Power Management IC

    • NMP0581 Power Supply IC

    • BGY252 and BGY 262 UHF Amplifier

  7. Other side of the PCB.
    • Other side of the PCB.

    • Hitachi HWYN202A 900MHz Duplexer

    • Intel F160B3TA Flash

    • Atmel 24C128 EPROM

    • Samsung KM68U1000 SRAM

    • Buzzer MZT-03C

    • Texas Instruments MAD2PRI Microcontroller (ARM Based)

  8. Disassembly Completed!
    • Disassembly Completed!

Bryan

Lid sinds: 27-10-12

690 Reputatie

5 handleidingen geschreven

Één commentaar

yaaaaas queeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeen

Gaubrisco - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 26

Altijd: 4,709