Gereedschappen die in deze demontage worden gebruikt

Inleiding

Here is the disassembly for a Nikon Coolpix 3200 digital camera.

Deze demontage is geen reparatiehandleiding. Om je Nikon Coolpix 3200 te repareren, gebruik onze reparatiehandleidingen.

Use a small Philips screwdriver to remove the screws from the base of the camera.
  • Use a small Philips screwdriver to remove the screws from the base of the camera.

Voeg opmerking toe

Use a small Philips screwdriver to remove the screws from the side of the camera where the computer lead is.
  • Use a small Philips screwdriver to remove the screws from the side of the camera where the computer lead is.

Voeg opmerking toe

Use a small Philips screwdriver to remove the two screws from the side of the camera where the card reader is.
  • Use a small Philips screwdriver to remove the two screws from the side of the camera where the card reader is.

Voeg opmerking toe

Pry apart the outer casing. A gray plastic threaded piece (used to attach camera to a tripod) will fall out.
  • Pry apart the outer casing. A gray plastic threaded piece (used to attach camera to a tripod) will fall out.

Voeg opmerking toe

Use a Phillips screwdriver to remove the two silver screws that connect the circuit board to the outer front casing.
  • Use a Phillips screwdriver to remove the two silver screws that connect the circuit board to the outer front casing.

Voeg opmerking toe

Pry apart the front outer casing from the circuit board. The camera will now be in three pieces.
  • Pry apart the front outer casing from the circuit board. The camera will now be in three pieces.

Voeg opmerking toe

Pull the connecting strip on the circuit board which connects it to the back outer casing. Pull the connecting strip on the circuit board which connects it to the back outer casing.
  • Pull the connecting strip on the circuit board which connects it to the back outer casing.

Voeg opmerking toe

Use a Philips screwdriver to remove the two screws next to the computer port and the brass screw on the circuit board. Use a Philips screwdriver to remove the two screws next to the computer port and the brass screw on the circuit board.
  • Use a Philips screwdriver to remove the two screws next to the computer port and the brass screw on the circuit board.

Voeg opmerking toe

Use a Phillips screwdriver to unscrew the three screws that connect the outer lens rim to the front casing. Use a Phillips screwdriver to unscrew the three screws that connect the outer lens rim to the front casing.
  • Use a Phillips screwdriver to unscrew the three screws that connect the outer lens rim to the front casing.

Voeg opmerking toe

Use a Philips screwdriver to remove the three screws that hold the flash cover to the outer front casing. Use a Philips screwdriver to remove the three screws that hold the flash cover to the outer front casing.
  • Use a Philips screwdriver to remove the three screws that hold the flash cover to the outer front casing.

Voeg opmerking toe

Open the lid of the battery compartment and use a Philips screwdriver to remove the two screws at the bottom.
  • Open the lid of the battery compartment and use a Philips screwdriver to remove the two screws at the bottom.

Voeg opmerking toe

Use a Phillips screwdriver to unscrew the two screws that connect the inside battery casing to the front of the outer casing.
  • Use a Phillips screwdriver to unscrew the two screws that connect the inside battery casing to the front of the outer casing.

Voeg opmerking toe

Pull off the battery casing from the inside of the outer front casing. The circuit board, battery casing, and front outer casing will be attached by a connecting strip along with red and black wires.
  • Pull off the battery casing from the inside of the outer front casing. The circuit board, battery casing, and front outer casing will be attached by a connecting strip along with red and black wires.

Voeg opmerking toe

Use scissors to cut the red and black wires away from the battery points of contact.
  • Use scissors to cut the red and black wires away from the battery points of contact.

Voeg opmerking toe

Pull the connecting strip away from the circuit board to separate it from the front casing.
  • Pull the connecting strip away from the circuit board to separate it from the front casing.

Voeg opmerking toe

Use a Philips screwdriver to unscrew the two screws that connect the photo button to the outer front casing.
  • Use a Philips screwdriver to unscrew the two screws that connect the photo button to the outer front casing.

Voeg opmerking toe

Firmly press on the photo button and this component will pop out.
  • Firmly press on the photo button and this component will pop out.

Voeg opmerking toe

Use a scalpel to pry apart the metal inner part of the button from the plastic outer piece. Use a scalpel to pry apart the metal inner part of the button from the plastic outer piece.
  • Use a scalpel to pry apart the metal inner part of the button from the plastic outer piece.

Voeg opmerking toe

Use your fingernails to peel the outer rim from the front casing. Use your fingernails to peel the outer rim from the front casing.
  • Use your fingernails to peel the outer rim from the front casing.

Voeg opmerking toe

  • Pull the connecting strip out of the circuit board to separate it from the LCD screen.

Voeg opmerking toe

  • Use your fingernails to pry apart the back metal piece of the screen (covered by a black plastic film) from the front section of the screen.

Voeg opmerking toe

Pry apart the back black piece and front white piece of the screen. Inside the screen there are four sheets of plastic: one opaque, two mirrored, and one thicker plastic sheet which has a foil piece attached to it.
  • Pry apart the back black piece and front white piece of the screen. Inside the screen there are four sheets of plastic: one opaque, two mirrored, and one thicker plastic sheet which has a foil piece attached to it.

Voeg opmerking toe

  • Use a hammer and chisel to separate the lens piece of the camera from the circuit board.

Voeg opmerking toe

  • Use your fingernails to pry off the motor, motor cover, and flash piece from the lens piece of the camera.

Voeg opmerking toe

Milly Whitehead

Lid sinds: 09-03-10

47 Reputatie

1 Handleiding geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 11

Altijd: 4,957