Gereedschappen die in deze demontage worden gebruikt

Video overzicht

Deze demontage is geen reparatiehandleiding. Om je Motorola Moto G 2nd Generation te repareren, gebruik onze reparatiehandleidingen.

  1. Remove back cover. It's easy, no adhesive and no screws.
    • Remove back cover. It's easy, no adhesive and no screws.

    Also remove the SIM and SDCard!

    Ben Low - Antwoord

  2. Twist off all 14 screws together and remove the back frame easily. But the screws feature different lengths, you'd better remember their positions.
    • Twist off all 14 screws together and remove the back frame easily. But the screws feature different lengths, you'd better remember their positions.

    "You'd better remember their positions" Can't you make full guides on all your devices?

    Glaceau Clara - Antwoord

    Hi there! This is a teardown, not a repair guide, check the full manual to see more complete guides, here for instance is a detailed screw removal step.

    Sam Lionheart -

    Just for completion as I made the same mistake today.

    The longer screws are at the top and the bottom (2x4 screws) and the shorter ones (2x3) at the left and right side of the case.

    Took me some time to find out which one goes to which position.

    Sebastian Schwägerl - Antwoord

    • Take away the volume button and power button.

    Voeg opmerking toe

    • Release SIM&SD card reader connector and battery connector. And get the vibrator motor free from adhesive.

    Can u explain little detailed about this step. Unable to release sim connector.

    Goutham Ram - Antwoord

    • Loosen the platinum foil under SIM & SD card reader from plate. And then drag the stickers out which fix the battery.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • At that time, remove the battery with SIM & SD card reader assembly together.

    Voeg opmerking toe

    • Separate battery and SIM & SD card reader assembly.

    Voeg opmerking toe

    • Release LCD screen connector from motherboard.

    Voeg opmerking toe

    • Release sensor flex connector and front camera connector respectively.

    Voeg opmerking toe

    • Remove screws on the motherboard and the motherboard can be removed easily.

    Voeg opmerking toe

    • Remove rear camera.

    Voeg opmerking toe

    • Remove front camera and sensor cable.

    Voeg opmerking toe

    • Remove earpiece and loudspeaker.

    Voeg opmerking toe

    • Done.

    Voeg opmerking toe

Sophia

Lid sinds: 25-03-14

41.004 Reputatie

62 handleidingen geschreven

Nice work!

REQUEST: Next time you do a cell phone would you also shoot a straight down on top shot. The 3/4 is nice but I want to look straight down !

TY

Top View - Antwoord

P.S. Or just do a single TOP VIEW at the END like this one from Dillon ! Pretty Please!

T-Mobile Huawei Prism U8651T Teardown

Top View -

Can anyone please tell me where I can get the details of the Antenna used for the GSM connection in this phone? Like the drawing or schematic.

Please I really need this as this phone has poor cell reception.

Amol - Antwoord

My Moto G just burned with 12 V from a cheap auto-recharger. But I lost very important data on the 8 GB memory. Is there a possible way to save the data?

mihaibanditu - Antwoord

Where can I get more information about GPS module and its antenna?

Paulo Abner - Antwoord

how to remove the external HDD? is there any way to recover data from it after detaching it from the device?

Atul Mohan - Antwoord

Give mi a seting

Ashish Barvhan - Antwoord

Mala motoG2 chi purn settings pahije

Ashish Barvhan - Antwoord

Can not remove the LCD?

jm2k7 - Antwoord

tanto el auricular y el altavoz son iguales si se invierte de posicion

Jorge Laura - Antwoord

what is issue if the moto g2 phone is heating at corner of near selfie camera when put for charging..

Mak Fighter - Antwoord

must be reply for my question…

Mak Fighter - Antwoord

what’s that small ribbon (looks like a thumbs up) coming out in image on step 13. I recently replaced a screen on my motog 2g and found this ribbon lying below battery but didnt know what to do with it. It is not a connector for sure as there are no sockets to connect there. my phone is working fine without my doing anything with that connector. just curious what it is for.

pradeep - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 5

Afgelopen 7 Dagen: 65

Afgelopen 30 Dagen: 320

Altijd: 49,034