Ga door naar hoofdinhoud

Gereedschappen die in deze demontage worden gebruikt

Inleiding

The full teardown of the MODAL WORCSS6 wine opener gives the user access to many of the critical internal components of the device for ease of repair and replacement.

Deze demontage is geen reparatiehandleiding. Om je Modal MD-WORCSS6 te repareren, gebruik onze reparatiehandleidingen.

  1. Put on Electrostatic Discharge (ESD) bracelet.  Hold the device with the transparent plastic casing on the top. Using the jimmy tool, carefully pry off the black plastic ring.
    • Put on Electrostatic Discharge (ESD) bracelet. Hold the device with the transparent plastic casing on the top.

    • Using the jimmy tool, carefully pry off the black plastic ring.

    • Remove the spring assembly from inside the transparent plastic tube.

  2. Using a Phillips #1 screwdriver, unscrew each of the four 12.7 mm screws inside and at the bottom of the plastic tube. Take the plastic tube off of the metal casing.
    • Using a Phillips #1 screwdriver, unscrew each of the four 12.7 mm screws inside and at the bottom of the plastic tube.

    • Take the plastic tube off of the metal casing.

  3. Place the jimmy tool blade between the button assembly and the metal casing. Gently pry off the button assembly; it should pop out. With the button assembly removed, slide off the metal casing.
    • Place the jimmy tool blade between the button assembly and the metal casing. Gently pry off the button assembly; it should pop out.

    • With the button assembly removed, slide off the metal casing.

  4. Unscrew the two 6.4 mm screws in the black plastic body using the Phillips #1 screwdriver. Separate the two halves of the plastic body. Keep the half containing the motor facing up. Separate the two halves of the plastic body. Keep the half containing the motor facing up.
    • Unscrew the two 6.4 mm screws in the black plastic body using the Phillips #1 screwdriver.

    • Separate the two halves of the plastic body. Keep the half containing the motor facing up.

  5. Carefully peel the tape off far enough to remove the 3 batteries. Carefully peel the tape off far enough to remove the 3 batteries. Carefully peel the tape off far enough to remove the 3 batteries.
    • Carefully peel the tape off far enough to remove the 3 batteries.

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 250