Gereedschappen die in deze demontage worden gebruikt

Inleiding

Will show the process of taking apart of computer mouse that uses a ball for the process of tracking motion.

Deze demontage is geen reparatiehandleiding. Om je Mouse te repareren, gebruik onze reparatiehandleidingen.

  1. Rotate mouse over and locate Trackball cover
    • Rotate mouse over and locate Trackball cover

    • Using index fingers and thumb, rotate counter-clockwise

    Voeg opmerking toe

  2. After the Trackball cover has been rotated, pry the lid off using fingernails.
    • After the Trackball cover has been rotated, pry the lid off using fingernails.

    • Remove Trackball cover and place to the side.

    • Angle mouse to eject Trackball from the casing.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Using a Phillips head screwdriver, locate screw hole and unscrew the screw inside.

    • Lift the two cases apart and place screw to the side.

    Voeg opmerking toe

    • Remove the wire from the plastic casing near the top of the mouse.

    • Lift up to remove the PCB which is attached to the mouse.

    • Place case to the side.

    Voeg opmerking toe

    • Locate where the wire is connected to the PCB via the white connection.

    • Pry the connections apart and place the cable to the side.

    Voeg opmerking toe

Kevin Gingrich

Lid sinds: 06-10-11

172 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 20-28, Maness Fall 2011 Lid van Cal Poly, Team 20-28, Maness Fall 2011

CPSU-MANESS-F11S20G28

4 Leden

7 handleidingen geschreven

Wow! Someone really worked hard on this guide. Kudos sir.

Tushar Varshney - Antwoord

Yes sir I won't know everything about the machine

mubarak wad gab tagel - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 9

Afgelopen 30 Dagen: 28

Altijd: 3,004