Ga door naar hoofdinhoud

Wat je nodig hebt

Deze demontage is geen reparatiehandleiding. Om je Logitech K700 Keyboard te repareren, gebruik onze reparatiehandleidingen.

  1. Logitech K700 Keyboard Teardown, Logitech K700 Keyboard Teardown: stap 1, afbeelding 1 van 1
    • Turn the keyboard over and slide the battery cover in the direction of the arrows slightly, and then lift the cover away.

  2. Logitech K700 Keyboard Teardown: stap 2, afbeelding 1 van 1
    • Remove the batteries and the two screws shown.

  3. Logitech K700 Keyboard Teardown: stap 3, afbeelding 1 van 1
    • Use a thumbnail or a pick to separate the clips around the periphery between the black and white plastic parts.

    • There are 4 clips on the top, 2 on either side, and 5 along the bottom. If you do the sides and top first, the bottom should slide out.

    • Don't separate the top and bottom immediately, since there are a couple of cables (near the touch pad) that connect between the two.

  4. Logitech K700 Keyboard Teardown: stap 4, afbeelding 1 van 1
    • The smaller of the two cables is for the touchpad. Lift the catch on its connector in order to slide it out.

    • The larger cable is for the key matrix. Just pull it out from the connector (friction fit).

    • This is as far as you can easily disassemble the keyboard. To go further requires removing 12 screws and 35 plastic rivets. This is not recommended.

    • To clean the keyboard of liquid, I suggest holding it over a sink with the touchpad side up, then spraying plenty of isopropyl alcohol from the back, avoiding the touch-pad area (you may wish to mask it off). Let dry completely before reassembling.

    • If keys still do not function after cleaning, then it is possible that traces on the key matrix have become corroded. This is not repairable, since the key matrix is a sealed unit. It consists of 3 layers of plastic that are sealed together. Unfortunately, it is not 100% sealed to prevent entry of liquids.

  5. Logitech K700 Keyboard Teardown: stap 5, afbeelding 1 van 1
    • Should you go further and remove the 12 screws and 35 plastic rivets, you can see this.

  6. Logitech K700 Keyboard Teardown: stap 6, afbeelding 1 van 1
    • The keys can be popped out easily enough by pushing from the back side. This exposes the key matrix.

  7. Logitech K700 Keyboard Teardown: stap 7, afbeelding 1 van 1
    • Here is the key matrix in all its glory.

cityzen

Lid sinds: 05/03/10

4.081 Reputatie

2 handleidingen geschreven

3 opmerkingen

Very helpful! I combined this and cleaning the battery compartments with a white vinegar drenched Q-Tip to clean out some old battery corrosion, and now it turns on!

mpeterfin - Antwoord

any way you could send me a pic of the backside of the battery cover? i’d like to try to recreate it with a 3d printer

Cody Nelson - Antwoord

codycnelson@gmail.com :)

Cody Nelson - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 45

Altijd: 15,782