Gereedschappen die in deze demontage worden gebruikt


This wireless router stopped working, so I wanted to take a look at it's innards.

Deze demontage is geen reparatiehandleiding. Om je Linksys BEFW11S4 te repareren, gebruik onze reparatiehandleidingen.

  1. Waiting to be disassembled...
    • Waiting to be disassembled...

  2. Remove antennas.
    • Remove antennas.

    • Remove nuts and washers around antenna connectors.

    • Push in antenna connectors.

    • Remove feet (with flat-head screwdriver, fingernails, etc).

    • Unscrew the screws.

    • Pull apart blue front from black back with a LOT of force.

    • Slide and pull up bottom. (Make sure the antenna connectors get through.)

    • Twist and pull out antenna connector feeds.

    • Pull up RF shield from motherboard.

    • Unscrew the motherboard from the bottom.

    • Push the motherboard forward (as in this picture) to unlatch it from the bottom.

    • Some people have a card where you have to unscrew it. If that is your case, do that. The instructions below is for my type of router.

    • Push the card forward to deattach the pins.

    • Remove the card from the metal holdster.

    • Here are the markings on the motherboard chips. If you have any info on these chips, please comment!

    • Macronix 29F040QC-90

    • ISSI IS41C16100S-50K


    • RMC RTL8019AS

    • Bothhands FB2022

    • Bothhands 40ST1041E

    • Kendin KS8995. Kendin has since been bought by Micrel.

    • Enjoy!


Lid sinds: 18-04-10

65 Reputatie

1 Handleiding geschreven

what is that card inside this router

hartiTube - Antwoord

Thank you. I accomplished this task. Except my antenna wires were soldered to the board.

Darren - Antwoord


Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 4

Altijd: 8,483