Ga door naar hoofdinhoud

Wat je nodig hebt

Deze demontage is geen reparatiehandleiding. Om je Kyocera Oystr te repareren, gebruik onze reparatiehandleidingen.

  1. Kyocera Oystr Teardown, Removing the battery: stap 1, afbeelding 1 van 3 Kyocera Oystr Teardown, Removing the battery: stap 1, afbeelding 2 van 3 Kyocera Oystr Teardown, Removing the battery: stap 1, afbeelding 3 van 3
    • Make sure the phone is turned off before disassembly.

    • Lift the bottom of the phone's back cover upwards, revealing the phone's battery housing.

    • Remove the battery from the casing. This is simply a precaution.

    • Turn the phone over so that the front side is facing you. Flip open the device in preparation for the next step.

  2. Kyocera Oystr Teardown, Removing screws from screen: stap 2, afbeelding 1 van 3 Kyocera Oystr Teardown, Removing screws from screen: stap 2, afbeelding 2 van 3 Kyocera Oystr Teardown, Removing screws from screen: stap 2, afbeelding 3 van 3
    • Peel the Virgin Mobile sticker from the phone's screen, revealing two screws beneath it.

    • Using the Tri-Wing Y0 screwdriver, remove the two screws from the screen.

  3. Kyocera Oystr Teardown, Exposing internal components: stap 3, afbeelding 1 van 3 Kyocera Oystr Teardown, Exposing internal components: stap 3, afbeelding 2 van 3 Kyocera Oystr Teardown, Exposing internal components: stap 3, afbeelding 3 van 3
    • Lift the plastic cover of the phone screen upwards by prying around the perimeter of the screen with a plastic opening tool.

    • After lifting the plastic cover from the screen, remove the two screws from the metal cover holding the screen in place.

  4. Kyocera Oystr Teardown, Removing metal cover: stap 4, afbeelding 1 van 1
    • Remove metal cover by lifting up and away from the device.

  5. Kyocera Oystr Teardown, Screen removal: stap 5, afbeelding 1 van 3 Kyocera Oystr Teardown, Screen removal: stap 5, afbeelding 2 van 3 Kyocera Oystr Teardown, Screen removal: stap 5, afbeelding 3 van 3
    • Remove the phone's speakers by using the plastic opening tool to pry up and away from the device. These speakers will dangle by the wires attached to the board.

    • Use your fingernail to detach the ribbon connecting the board to the screen.

    • Remove the damaged screen from the device.

  6. Kyocera Oystr Teardown, Completing the repair: stap 6, afbeelding 1 van 1
    • Follow steps in reverse order to replace Kyocera Oystr’s screen.

David

Lid sinds: 10/04/11

24 Reputatie

2 handleidingen geschreven

Team

UW Stout, Team 5-7, Zhou Fall 2011 Lid van UW Stout, Team 5-7, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G7

2 Leden

4 handleidingen geschreven

2 opmerkingen

where do I get a new screen?

LARS ANDERSEN - Antwoord

where do i get a new screen

thanks

LARS ANDERSEN - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 5

Altijd: 4,314