Ga door naar hoofdinhoud

Video overzicht

Deze demontage is geen reparatiehandleiding. Om je Huawei P8 Lite te repareren, gebruik onze reparatiehandleidingen.

  1. Remove the SIM & SD card trays first. Remove the SIM & SD card trays first.
    • Remove the SIM & SD card trays first.

  2. Remove the battery door—it's fastened tightly by clips. Free the clips with your fingernail or a pry tool. Be careful because the midframe is easily scratched, and the glass at the top of the battery door is easily broken.
    • Remove the battery door—it's fastened tightly by clips. Free the clips with your fingernail or a pry tool.

    • Be careful because the midframe is easily scratched, and the glass at the top of the battery door is easily broken.

  3. Remove the torx screws on the back. Remove the torx screws on the back.
    • Remove the torx screws on the back.

  4. Remove the loudspeaker by prying it up with a spudger. Remove the loudspeaker by prying it up with a spudger.
    • Remove the loudspeaker by prying it up with a spudger.

  5. Remove the securing brackets covering the motherboard. Remove the securing brackets covering the motherboard. Remove the securing brackets covering the motherboard.
    • Remove the securing brackets covering the motherboard.

  6. Carefully release all the connectors on the board, and remove the motherboard. Carefully release all the connectors on the board, and remove the motherboard. Carefully release all the connectors on the board, and remove the motherboard.
    • Carefully release all the connectors on the board, and remove the motherboard.

  7. Remove the rear camera and front camera. Remove the rear camera and front camera. Remove the rear camera and front camera.
    • Remove the rear camera and front camera.

  8. Remove the power flex.
    • Remove the power flex.

  9. Remove the battery. There is strong adhesive under the battery—work carefully to pry it free and be careful not to puncture the battery. Try an iOpener or hairdryer to heat the adhesive behind the battery. This softens the adhesive, making it easier to release the battery.
    • Remove the battery. There is strong adhesive under the battery—work carefully to pry it free and be careful not to puncture the battery.

    • Try an iOpener or hairdryer to heat the adhesive behind the battery. This softens the adhesive, making it easier to release the battery.

  10. Remove the motor vibrator. Remove the motor vibrator.
    • Remove the motor vibrator.

  11. Remove the sensor flex. It's covered under the digitizer flex and fastened by adhesive.
    • Remove the sensor flex. It's covered under the digitizer flex and fastened by adhesive.

  12. Remove the earpiece speaker.
    • Remove the earpiece speaker.

  13. Heat, cut the adhesive sticker and remove the screen carefully. Heat, cut the adhesive sticker and remove the screen carefully. Heat, cut the adhesive sticker and remove the screen carefully.
    • Heat, cut the adhesive sticker and remove the screen carefully.

  14. You're done!
    • You're done!

Sophia

Lid sinds: 25-03-14

42.300 Reputatie

62 handleidingen geschreven

Ciao ma la pistrina nera sulla batteria da dove posso comprarla? Perché mi è arrivato un terminale con il flat tagliato della pistrina e dovrei sostiturila.. Oppure può farne ammeno e cambio solo la batteria?

vito - Antwoord

thank you, its inspirating

buchta - Antwoord

Hello, I completed this repair and now the back-light is not working. Any suggestions? Know where I could locate a diagram of this board? TIA

beck74 - Antwoord

THis mobile audio ic for main speaker need information. because audio is full off on my phone but buzzer is health and good please help me but handset and small speaker are working

mohandes - Antwoord

Sir sent me p8 lite LCD light track

umarshazad001 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 20

Afgelopen 7 dagen: 84

Afgelopen 30 dagen: 332

Altijd: 101,872