Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Gereedschappen die in deze demontage worden gebruikt

Inleiding

The guide will provide a detailed teardown guide from beginning to end.

Deze demontage is geen reparatiehandleiding. Om je Space Heater te repareren, gebruik onze reparatiehandleidingen.

  1. Remove the grill from corner to corner. Remove the grill from corner to corner. Remove the grill from corner to corner.
    • Remove the grill from corner to corner.

  2. Carefully remove the screws and place them aside. Carefully remove the screws and place them aside.
    • Carefully remove the screws and place them aside.

  3. As seen in the pictures, set the screwdriver on the edge of the cover and pry it out. As seen in the pictures, set the screwdriver on the edge of the cover and pry it out. As seen in the pictures, set the screwdriver on the edge of the cover and pry it out.
    • As seen in the pictures, set the screwdriver on the edge of the cover and pry it out.

  4. SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits

    SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits
  5. Remove sticker in order to open the plastic casing of the heater. Remove sticker in order to open the plastic casing of the heater.
    • Remove sticker in order to open the plastic casing of the heater.

  6. Slowly and carefully pry the plastic casing. Slowly and carefully pry the plastic casing.
    • Slowly and carefully pry the plastic casing.

  7. Apply pressure onto the sides of the switch while pushing it outwards. Apply pressure onto the sides of the switch while pushing it outwards.
    • Apply pressure onto the sides of the switch while pushing it outwards.

  8. Unscrew the four screws located in the rear of the device. Remove the fan. Unscrew the four screws located in the rear of the device. Remove the fan. Unscrew the four screws located in the rear of the device. Remove the fan.
    • Unscrew the four screws located in the rear of the device. Remove the fan.

Garland Poon

Lid sinds: 03-04-12

120 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 14-8, Forte Spring 2012 Lid van Cal Poly, Team 14-8, Forte Spring 2012

CPSU-FORTE-S12S14G8

5 Leden

15 handleidingen geschreven

Één commentaar

I keep having problems with that little part that looks like a pen cap - white plastic. Is it a connector ou a fuse?

Cristina S - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 1,021