Ga door naar hoofdinhoud

Deze demontage is aan de gang – Herlaad regelmatig om de laatste wijzigingen te zien!

Wat je nodig hebt

  1. Cuisinart 4-Slice Tandem Toaster Teardown, Cuisinart 4-Slice Tandem Toaster Teardown: stap 1, afbeelding 1 van 1
    • This Cuisinart Toaster's technical highlights include:

    • Tandem, 2-slot toaster

    • 1½" wide toasting slots

    • Function control dial

    • Bagel, Defrost and Reheat selections

    • Blue LED shade control with large, easy-to-read numbers

    • 2 or 4 slice button; cancel button

  2. Cuisinart 4-Slice Tandem Toaster Teardown: stap 2, afbeelding 1 van 2 Cuisinart 4-Slice Tandem Toaster Teardown: stap 2, afbeelding 2 van 2
    • Unplug the toaster prior to teardown.

    • On the bottom of the toaster, unscrew the 4 Torx screws (using a screw driver)

  3. Cuisinart 4-Slice Tandem Toaster Teardown: stap 3, afbeelding 1 van 3 Cuisinart 4-Slice Tandem Toaster Teardown: stap 3, afbeelding 2 van 3 Cuisinart 4-Slice Tandem Toaster Teardown: stap 3, afbeelding 3 van 3
    • Pull the press handle down and away from the toaster to disconnect the body.

    • Lift up the body of the toaster.

  4. Cuisinart 4-Slice Tandem Toaster Teardown: stap 4, afbeelding 1 van 1
    • Pull the pin header cable to disconnect the body of the toaster from the main assembly unit.

  5. Cuisinart 4-Slice Tandem Toaster Teardown: stap 5, afbeelding 1 van 3 Cuisinart 4-Slice Tandem Toaster Teardown: stap 5, afbeelding 2 van 3 Cuisinart 4-Slice Tandem Toaster Teardown: stap 5, afbeelding 3 van 3
    • Remove the 5 Torx screws to detach the heating unit from the bottom of the toaster unit.

  6. Cuisinart 4-Slice Tandem Toaster Teardown: stap 6, afbeelding 1 van 3 Cuisinart 4-Slice Tandem Toaster Teardown: stap 6, afbeelding 2 van 3 Cuisinart 4-Slice Tandem Toaster Teardown: stap 6, afbeelding 3 van 3
    • Using a plastic opening tool, carefully pry open the metal casing underneath the toaster.

  7. Cuisinart 4-Slice Tandem Toaster Teardown: stap 7, afbeelding 1 van 3 Cuisinart 4-Slice Tandem Toaster Teardown: stap 7, afbeelding 2 van 3 Cuisinart 4-Slice Tandem Toaster Teardown: stap 7, afbeelding 3 van 3
    • Remove the screws to detach controls from the plastic shell of the toaster.

  8. Cuisinart 4-Slice Tandem Toaster Teardown: stap 8, afbeelding 1 van 1
    • Interior of the user control interface

  9. Cuisinart 4-Slice Tandem Toaster Teardown: stap 9, afbeelding 1 van 1
    • Remove the soldered wire that is hooked to each part of the end plate assembly.

  10. Cuisinart 4-Slice Tandem Toaster Teardown: stap 10, afbeelding 1 van 2 Cuisinart 4-Slice Tandem Toaster Teardown: stap 10, afbeelding 2 van 2
    • Heating Unit

  11. Cuisinart 4-Slice Tandem Toaster Teardown: stap 11, afbeelding 1 van 1
    • This is the Circuit Board used for controlling each subsystem of the toaster.

    • The integrated circuit marked 4541 contains an oscillator which oscillates at some hundreds or thousands of oscillations per second, the speed being determined by the browning setting. It also contains a binary counter which can count up to 65,536.

    • The integrated circuit marked 4066 contains several logic gates which select the count value required for normal, defrost or reheat.

    • During the count, the logic gates supply a small current to the transistor, causing it to energise the electromagnet. At the end of the selected count, the logic gates switch this current off and the transistor de-energises the electromagnet.

    • While energised, the electromagnet holds the lever down. When the current is switched off the lever is released and the spring pops the toast up.

    • Toasters of this age frequently use these "4000-series" integrated circuits as they can run off a wide range of supply voltages. Newer toasters use a microcontroller (essentially a simple micro computer) as this is more flexible in its functions and can also easily drive LEDs to show you what the toaster is doing.

  12. Cuisinart 4-Slice Tandem Toaster Teardown: stap 12, afbeelding 1 van 1
    • Main Assembly Unit

  13. Cuisinart 4-Slice Tandem Toaster Teardown: stap 13, afbeelding 1 van 1
    • Main Element Assembly

    • Crumb Tray with Power Cord

    • Circuitry with Heating Component

    • User Control Interface with Buttons

    • Press Handle Spring

Lucas Tintikakis

Lid sinds: 03/02/14

133 Reputatie

1 Handleiding geschreven

Team

EE460 UNO Lid van EE460 UNO

Community

2 Leden

8 handleidingen geschreven

3 opmerkingen

Have this broken device and would be glad to us this demonstration to fix it!

Robert Scherer - Antwoord

Thanks for this great post-up. Saved me a lot of time not having to figure out the disassembly. Hope my comments will further help others trying to do the same.

Cheers!

Keith

K Lynch - Antwoord

Muy detallado desmontaje felicitaciones

Carlos López (España - Spain) - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 46

Altijd: 6,108