Ga door naar hoofdinhoud
« Terug naar alle verhalen

Fixed LCD on Macbook Pro

JuliusGaius37 -

MacBook Pro 15" Unibody Late 2008 and Early 2009

MacBook Pro 15" Unibody Late 2008 and Early 2009 LCD Replacement

MacBook Pro 15" Unibody Late 2008 and Early 2009 LCD Replacement

Very difficult

Mijn probleem

Broken LCD w/ verticle bands of solid white/black.

Mijn oplossing

Reasonably well. Used a hair dryer instead of a heat gun. Had a lot of trouble getting LVDS cable (also replaced) to stay in the lcd when putting everything back together.

Mijn advies

My LCD panel has about 50 stuck red pixels all in a clump in the lower left corner. This could be because of incorrect installation, but I've done a few of these and never had a problem before. I suspect a bad panel.

I would like to see more guidance on how much heat to apply to the glass, how to secure and route cables (especially lvds), and maybe some videos of the trickier parts of the repair.

Spudger Afbeelding
Spudger

$3.99

T6 Torx Screwdriver Afbeelding
T6 Torx Screwdriver

$9.99

Phillips #00 Screwdriver Afbeelding
Phillips #00 Screwdriver

$5.49

Heavy-Duty Suction Cups (Pair) Afbeelding
Heavy-Duty Suction Cups (Pair)

$14.95

P6 Pentalobe Screwdriver 2009 15" MacBook Pro Battery Afbeelding
P6 Pentalobe Screwdriver 2009 15" MacBook Pro Battery

$5.49

MacBook Pro 15" Unibody (Late 2008 - Late 2011) LCD Panel Afbeelding
MacBook Pro 15" Unibody (Late 2008 - Late 2011) LCD Panel

$84.99

« Terug naar alle verhalen

0 opmerkingen

Voeg opmerking toe