Mijn probleem
When turn on and use My iPhone, it will get very hot in 10 minutes!
And, battery will be empty in 1 hour even full charged.
That's crazy!
So, I decided fix it.
Mijn oplossing
I referred those iFixit web page:
iPhone 3GS Replacement Battery:
iPhone 3GS Battery Replacement
It's easy!
But No.3 flat cable can be broken easily.
(See my Enlightenment)
Mijn advies
I have three advises.
[1st]
Suction Cup can be substituted for your any suction cup.
I purchased in the 100-yen shop, not iFixit.
(See a photo. I bought blue one. It sales "Stamp Holder" in DAISO Japan, but can use as suction cup. It is easy to hold a suction cup than Suction Cup what selling iFixit.)
So, if you can go to shop and buy like it, cheap than buy from iFixit. You can save your money.
[2nd]
When you disconnecting No.3 flat cable, be careful.
It can be broken easily.
You should unlock No.3 cable before disconnect it.
I broke my No.3 cable, omg(>_<)
[3nd]
Removing finely "Do not remove" seal is very difficult.
(2nd Photo : Before removed seal)
I couldn't remove finely, but I have made it in pieces (See also 3rd Photo)
So, when you remove the seal, be careful.
And I think that you must be ready for a seal becoming in pieces.
I'm hoping that "Do not remove" seal be sold by iFixit.
-----------------------------
Thank you for reading! And sorry for my poor English.
I'm hoping that this my Story will be help you!
Thanks again!!
watappo (twitter on @watappo)
0 opmerkingen