iOpener

  • iOpener / Toolkit / New
  • iOpener / Tool Only / New
  • iOpener / Tool Only / New
  • iOpener / Tool Only / New
  • 360°
360
iOpener

This product cannot be shipped to Mexico.

Este producto no puede enviarse a México.

$19.99

$19.99

We zullen een bericht sturen als het product weer op voorraad is.

Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

Productdetails

Beschrijving

Beschrijving

The iOpener is a tablet opening tool designed to apply heat directly and evenly to case components joined with adhesive. Once the adhesive is softened with heat applied by the iOpener, the adhesive can be sliced using the many tools included in the iOpener kit. This toolkit is designed specifically for the iPad, but works with all tablets, smartphones, or other electronics needing heat application in the disassembly process. The iOpener is heated in your microwave. It is reusable, non-toxic, and food safe.

Notitie

This product cannot be shipped to Mexico.

Notitie

Avoid overheating your iOpener, follow this handy microwave heating guide.

Reparatieverhalen

ericzel08's Story Photo #1329847
ericzel08's Story Photo #1329848

Mijn probleem

Phone was dropped. Screen cracked so bad there was no display.

Mijn oplossing

As good as most screen repairs can be expected to go.

Mijn advies

Buy some adhesive tape. If I had some I would've completely removed the leftover junk and put new stuff on the screen.

Mijn probleem

I waited like 8 months for parts to come into stock. Poor inventory procurement!

Mijn oplossing

Series 2 - 42mm screen and digizer installed as expected.

Mijn advies

Take your time. Use a small 1mm flat head screw driver to remove the extra 3M double sided tape from the aluminum sealing surface. Use acitone to remove the extra . . .

Mijn probleem

The housing on my Switch had become warped, in ordered a replacement housing and decided to throw some custom colors on my Joy-Cons while I was at it.

Mijn oplossing

Fairly easy, the hardest part was making sure not to tear the digitizer flex and making sure all the meshes small parts were transferred from the old . . .

Mijn probleem

Went well. He did all the work and I just held the laptop and scroll down the instructions. He is 14 y.o. and has done multiple screen replacements and battery replacements.

Mijn oplossing

See above.

Mijn advies

Perfect Father & Son bonding experience.

Mijn probleem

Lithium battery needed to be replaced

Mijn oplossing

Your instructions were spot on and the repair was perfect.

Mijn advies

Patience and heat to loosen the adhesive.

Mijn probleem

My wife dropped it several times creating multiple cracks on the screen.

Mijn oplossing

The repair went well. I took my time and followed all the steps in the repair guide faithfully. I was even able to unsolder the small wake/sleep sensor from the broken screen and microsolder it back onto the new replacement scre . . .

Mijn probleem

My pixel XL's USB-C port would smoke when the cable was connected and the plastic portion of the connection was visibly melted.

Mijn oplossing

I was successful in changing the battery charging circuit/daughter board but I accidentally sliced the digitizer traces on the ribbon cable for the OLED panel while removing . . .

Mijn probleem

My phone is long since out of warranty or support. The battery had gotten to a point where I needed to charge as I used for traffic app, etc. I watched the videos and decided it was well within my capabilities to change battery. Worst case scenario would be that I irretrievably broke something and . . .

Mijn probleem

After well over 2 years in service, my factory battery was completely incapable of powering the phone for more than a few minutes with the screen off. Turning the screen on meant a nearly instant shutdown.

Mijn oplossing

The repair went incredibly well. Despite this being a particularly difficult phone to open, i . . .

Mijn probleem

The battery was losing charge rapidly, and seemed to be showing its age. The Pixels that have come out since did not appear to be compelling upgrades. So, I figured replacing the battery made the most sense.

Mijn oplossing

The outcome was positive. Opening the phone requires getting past a lot of epoxy. I marred on . . .

Geef meer weer