Mijn probleem
Battery wouldn't hold a charge
Mijn oplossing
Replaced the battery but I the battery won't charge
Mijn advies
Get an extra battery
Dit product is niet beschikbaar in jouw land.
Artikelcode: IF317-092-1
Dit product is niet beschikbaar in jouw land.
US$ 19,99
In de aanbieding
A-voorraad gebruikte onderdelen zijn in uitstekende staat
B-voorraadonderdelen hebben kleine cosmetische slijtage
C-voorraadonderdelen hebben grote cosmetische slijtage, maar zijn volledig functioneel
US$ 19,99
In de aanbieding
Niet op voorraad
We hebben niet zo veel voorraad beschikbaar
Productdetails
Beschrijving
Beschrijving
60w Classic style soldering iron from Hakko. This reliable dual-coil iron maintains a temperature of approximately 460 to 485 Celsius. Includes a chisel tip. Great iron for home and hobby use.
Reparatieverhalen
Battery wouldn't hold a charge
Replaced the battery but I the battery won't charge
Get an extra battery
After charging overnight my battery would go to red line in a few hours.
The repair went very smoothly. The hardest part was getting the ipod apart. The 7 Philips screws were difficult. Of the 7, 5 came out ok, but 2 had head damaged by the time I was done.... but there was enough left to reassemble though, so all worked out well.
One important piece of advice. The ifixit instructions list a #00 Philips screwdriver under tools however I needed a #0000 Philips to get the screws out.
After charging overnight my battery would go to red line in a few hours.
The repair went very smoothly. The hardest part was getting the ipod apart. The 7 Philips screws were difficult. Of the 7, 5 came out ok, but 2 had head damaged by the time I was done.... but there was enough left to reassemb . . .
Wordt vaak samen gekocht
Aanbevolen producten