MacBook Unibody (A1342) Lower Case

  • MacBook Unibody (A1342) Lower Case
MacBook Unibody (A1342) Lower Case

US$ 149,99

US$ 149,99

We zullen een bericht sturen als het product weer op voorraad is.

iPhone Batterij Fix Kits

Slechts $29.99

Buy Now

iPhone Batterij Fix Kits

Slechts $29.99

Buy Now

Productdetails

Beschrijving

Beschrijving

Replace a dented or scratched lower case compatible with a Model A1342 MacBook Unibody laptop.

Compatibiliteit

Compatibiliteit

  • MacBook 13" Unibody A1342 Late 2009 to Mid 2010

Specificaties

Specificaties

Part #:
922-9183, 661-5974
Model #:
A1342

Compatibiliteit

Reparatieverhalen

Avatar
gveldman's Story Photo #462277

Mijn probleem

A few weeks ago the rubber coating released it self, caused by the heat, from the lowercase of our Macbook, end 2009 version. Because the Apple replacement program was not applied on this Macbook, I decided to repair it my self. The Macbook is in perfect state, including 4GB memory and running Yosem . . .

Avatar

Mijn probleem

Rubberized on original back was coming off. Rubber stretched and buckled over time

Mijn oplossing

Easy, eight screws and done. Finding the correct back from other vendors was the greatest headache

Mijn advies

call Fixit first.

Avatar

Mijn probleem

My partners late 2009 Macbook started to fall apart all at once. The rubberised bottom peeled off, the batter stopped holding a charge and the fan failed.

I replaced the laptop with a new macbook and kept the old one until it failed completely which was the day after it was replaced.

A year later . . .

Avatar

Mijn probleem

Bottom was missing screws, and rubber was coming off the metal. Was not affecting operation of the laptop. More cosmetic than anything.

Mijn oplossing

Got the new bottom and screws in the mail a few days after I ordered them, removed the old bottom, and installed the new bottom within minutes. Very easy to do.

Mijn advies

N . . .

Avatar

Mijn probleem

Heavy-duty processing warms up the underside of my MacBook, and eventually the rubber layer on the base-plate released itself from the metal where the heat is most intense and created a large bubble. The computer couldn't sit flat on a tabletop anymore, so a replacement base-plate was required.

Mijn oplossing

The n . . .

Avatar

Mijn probleem

My wife's Macbook stopped charging. After a short troubleshooting I figured out that the Magsafe connector was at fault. Also, as the laptop was mostly used on soft covered surfaces, cooling was poor, causing some overheating of the lower case, hence causing bubbling of the non slippery rubberized s . . .

Avatar

Mijn probleem

Because it was broken.

Mijn oplossing

10 min. Done.

Mijn advies

It's great. Never grab your chick and through it to the bed when the laptop is sitting there. The display screen may suffer.

Avatar

Mijn probleem

The old case was coming apart and needed to be replaced.

Mijn oplossing

Very easy, just remove old case and replace with the new one.

Mijn advies

Having the right screwdriver made the job easier. Would recommend that first.

Geef meer weer