Dit product is niet beschikbaar in jouw land.
Artikelcode: IF108-021-1
Dit product is niet beschikbaar in jouw land.
US$ 39,99
In de aanbieding
A-voorraad gebruikte onderdelen zijn in uitstekende staat
B-voorraadonderdelen hebben kleine cosmetische slijtage
C-voorraadonderdelen hebben grote cosmetische slijtage, maar zijn volledig functioneel
US$ 39,99
In de aanbieding
Niet op voorraad
We hebben niet zo veel voorraad beschikbaar
Productdetails
Beschrijving
Beschrijving
An aging fan may become noisy and inefficient or simply fail and stop spinning, leaving your laptop to overheat and eventually damaging your processors. Replace a defective fan to fix overheating problems or to keep your Mid 2011 to Early 2015 model 11" MacBook Air running quietly.
Includes fan and surrounding metal bracket.
Compatibiliteit
Compatibiliteit
Specificaties
Specificaties
Compatibiliteit
MacBook Air 11" Early 2014
|
|
||
MacBook Air 11" Early 2015
|
|
||
MacBook Air 11" Mid 2011
|
|
||
MacBook Air 11" Mid 2012
|
|
||
MacBook Air 11" Mid 2013
|
|
Toon 2 meer apparaten
Verberg 2 apparaten
Vervangingshandleidingen
Moeilijkheid:
Gemiddeld
Moeilijkheid:
Gemiddeld
Moeilijkheid:
Gemiddeld
Moeilijkheid:
Gemiddeld
Moeilijkheid:
Gemiddeld
Reparatieverhalen
Old fan was making all sorts of noise. I didn't even realize my Mac had a fan for years until this fan started to go, and then it was obvious as a blue sky.
Overall, it was a pretty easy repair, but a tad trickier than a standard PC laptop due to the tight tolerances and incredibly small parts. If you can put the Mac in a shallow box so no screws get lost in the process, it'll probably help considerably.
The only super tricky part was sliding the new fan's ribbon cable into the slot. I used the spudger and pushed on the only small crease I could find to slide it into the slot. I suggest powering it on while still apart to verify functionality, then power it off and finish stitching everything back together.
Old fan was making all sorts of noise. I didn't even realize my Mac had a fan for years until this fan started to go, and then it was obvious as a blue sky.
Overall, it was a pretty easy repair, but a tad trickier than a standard PC laptop due to the tight tolerances and incredibly small parts. If yo . . .
Fan was not cooling my Macbook Air 11"... I had to use an app to speed up my fan's rotational speed to keep my mac cool. Finally I decided to replace the fan.
It was easy with the instructions provided by IFIXIT.
Have a good workspace and time to methodically complete any repair.
After troubleshooting SOOO MANY THINGS - it was clear that the issue was isolated to the fan. It sounded like, based on all other forums I had read, that the ball bearing in the fan had run it's course and the least expensive route (short of shooting some silicone lubricant into the fan) was to replace the fan.
Fantastic! I had already purchased the official iFixIt tool kit and spudger and it hadall of the bits that I needed to open the macbook air and safety perform all of the necessary operations.
From start to finish and successful reboot with the new fan, it took less than 45 minutes. Thank you so much iFixIt!
Make sure you have some dedicated container(s) for all of the teeny tiny screws that are part of this process.
Also - be sure to put the dampening rubber that's on the old fan and transfer it to the new fan (the new fan did not come with it).
After troubleshooting SOOO MANY THINGS - it was clear that the issue was isolated to the fan. It sounded like, based on all other forums I had read, that the ball bearing in the fan had run it's course and the least expensive route (short of shooting some silicone lubricant into the fan) was to rep . . .
Fan stopped working. Turned out my lazy-self got a piece of a shreddie stuck inside. Regular for me; irregular for a laptop.
Everything went according to plan except the driver (P5) stripped. iFixIt dispatched a replacement NEXT DAY! Wow, what service.
If you have multiple P5-bolt-burdened devices though, get the high-end driver.
Also there's a rubber air guide/seal on the original Fan that you have to peel off and stick to the new fan - as the replacement fan doesn't include it - no biggie, just FYI!
Fan stopped working. Turned out my lazy-self got a piece of a shreddie stuck inside. Regular for me; irregular for a laptop.
Everything went according to plan except the driver (P5) stripped. iFixIt dispatched a replacement NEXT DAY! Wow, what service.
If you have multiple P5-bolt-burdened devices tho . . .
The fan wasn't working anymore, and made a light repetitive click noise.
Well. But opening was enough. No need to change the fan, there was just some crumble blocking the fan…
Good luck
Geef meer weer
Minder Weergeven
Wordt vaak samen gekocht
Aanbevolen producten
