Ga door naar hoofdinhoud
Pin Punch Holder Hoofdafbeelding

Pin Punch Holder

Holder for pin punch bits. These can be obtained at watchmakers supply sites. Punches of Bergeon or Minathor manufacture are good.

Type Part # Supplier URL
Pin Holder MSA-10.500-A Otto Frei

Insert a pin punch bit shank-first into the hole at the end of the holder. Springs on the inside will hold the pin punch bit in place.

For some applications, such as using the holder in an arbor press, you may want to grind the rounded top of the holder flat.

Block Image
Block Image

Pagina 1 van 1


Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 270