Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 3
Use the flat end of a spudger to carefully flip up the retaining flaps on the digitizer ribbon cable ZIF sockets. Make sure you are flipping up the white retaining flaps, not the black sockets themselves. Use the tip of a spudger to pull the digitizer ribbon cable straight out of its socket.
  • Use the flat end of a spudger to carefully flip up the retaining flaps on the digitizer ribbon cable ZIF sockets.

  • Make sure you are flipping up the white retaining flaps, not the black sockets themselves.

  • Use the tip of a spudger to pull the digitizer ribbon cable straight out of its socket.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.