Ga door naar hoofdinhoud
Stap 7
The dual rear camera has a beefy bracket that looks like it might offer some bendgate-proofing support for the delicate components. The cameras are additionally secured to the rear case with some foam adhesive to keep things from jostling out of place. These cameras really need to stay put for Portrait Mode and similar features to work their magic. Surrounding the camera housing cover glass, you can see tiny spot welds likely holding the walls of the camera bump to the case.
  • The dual rear camera has a beefy bracket that looks like it might offer some bendgate-proofing support for the delicate components.

  • The cameras are additionally secured to the rear case with some foam adhesive to keep things from jostling out of place. These cameras really need to stay put for Portrait Mode and similar features to work their magic.

  • Surrounding the camera housing cover glass, you can see tiny spot welds likely holding the walls of the camera bump to the case.

La doppia fotocamera posteriore presenta una grossa staffa che, si direbbe, offre un supporto a prova di piegatura per questi delicati componenti.

Le fotocamere sono ulteriormente fissate al case posteriore con dell'adesivo in espanso per tenerle ancora meglio al loro posto. Una "fermezza" necessaria perché queste fotocamere possono esprimere tutta la loro magia nel Portrait Mode e nelle altre modalità avanzate.

Attorno al vetro di copertura delle fotocamere, si possono vedere dei minuscoli punti di saldatura che probabilmente tengono aderenti al case le pareti della "gobba" della fotocamera.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.