Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 8
As seen in Step 1, the  fingerprint reader cable runs to the left of the camera, fairly close to the edge of the phone. Be careful as you cut through the adhesive in the upper edges of the phone. Carefully slide an opening pick across the top edge of the phone, separating the last of the adhesive securing the rear glass panel. Carefully slide an opening pick across the top edge of the phone, separating the last of the adhesive securing the rear glass panel.
  • As seen in Step 1, the fingerprint reader cable runs to the left of the camera, fairly close to the edge of the phone. Be careful as you cut through the adhesive in the upper edges of the phone.

  • Carefully slide an opening pick across the top edge of the phone, separating the last of the adhesive securing the rear glass panel.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.