Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
CAREFUL as you remove the brewgroup as it is still connected via the hose till you do step 3. this step is mostly for reassembly. You need to align the brewgroup so that the knob circled in BLUE slips into the RED circle before you put the screws in. this step is mostly for reassembly. You need to align the brewgroup so that the knob circled in BLUE slips into the RED circle before you put the screws in.
Aligning Brewgroup into the machine
  • CAREFUL as you remove the brewgroup as it is still connected via the hose till you do step 3.

  • this step is mostly for reassembly. You need to align the brewgroup so that the knob circled in BLUE slips into the RED circle before you put the screws in.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.