Ga door naar hoofdinhoud

MacBook Pro 15" Retina Display Mid 2012 AirPort/카메라 케이블 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 46 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement: stap 0, afbeelding 1 van 1
  • Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.

  • The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.

  • To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

스퍼저 또는 핀셋을 사용하여 AirPort 안테나 케이블 세 개를 AirPort 보드의 소켓에서 똑바로 들어 올리세요.

케이블 연결 부위는 약합니다. 소켓이나 케이블이 아닌 커넥터만 들어 올리도록 주의하세요.

다시 연결하려면 커넥터를 소켓 위에 조심히 정렬한 다음 스퍼저의 납작한 부분으로 단단히 누르세요.

-[* black] Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.
+[* black] Use a spudger or [product|IF145-020|tweezers] to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.
[* icon_caution] The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.
[* icon_reminder] To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.