Ga door naar hoofdinhoud

MacBook Pro 15インチ Retina Display Mid 2012 のディスプレイアセンブリの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 5
MacBook Pro 15" Retina Display Mid 2012 Display Assembly Replacement: stap 0, afbeelding 1 van 1
  • Open the MacBook Pro approximately 110 degrees, and place it sideways on the table, as shown.

  • While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the lower (closer to the table) display bracket.

MacBook Proを約110度に開き、画像のようにテーブル上に横向きで配置します。

ディスプレイと上部ケースを左手で固定しながら、下部(テーブル側)ディスプレイブラケットから残りのT8トルクスネジを外します。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.