Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 9
The metal cover to the PCB can be easily pried apart with a flat head screwdriver. After doing this, the two screws connecting the cable to the PCB is revealed. Remove the two screws, then pop off the connector straight up, not at an angle.
Separate metal and cable from PCB
  • The metal cover to the PCB can be easily pried apart with a flat head screwdriver.

  • After doing this, the two screws connecting the cable to the PCB is revealed.

  • Remove the two screws, then pop off the connector straight up, not at an angle.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.