Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 8
After removed the PCB, you can see the front camera sensor compartment. Peel off the copper tape on both side before the next step. (SHARP EDGES -TWEEZERS recommend). Remove 4 screws to disassemble the front camera sensor on each side.
  • After removed the PCB, you can see the front camera sensor compartment.

  • Peel off the copper tape on both side before the next step. (SHARP EDGES -TWEEZERS recommend).

  • Remove 4 screws to disassemble the front camera sensor on each side.

  • Cameras were not easily identifiable, however, they looked identical to the cameras we found in our Acer MR HMD teardown. Also had similar part numbers to the the Microsoft Surface 3 rear camera.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.