Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 7
With the lenses removed, you can begin separating the PCB from whats left of the HMD. USE TWEEZERS to peel back the two pieces of metallic tape on the PCB (this tape is SHARP — do not use your hands). Remove the four screws to remove the two metal clips on each side of the PCB.
Remove metallic tape
  • With the lenses removed, you can begin separating the PCB from whats left of the HMD.

  • USE TWEEZERS to peel back the two pieces of metallic tape on the PCB (this tape is SHARP — do not use your hands).

  • Remove the four screws to remove the two metal clips on each side of the PCB.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.