Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 5
In the bottom left corner of the HMD, you'll find the audio jack and the board attached to it. With a flat head screwdriver, gently pry the connector from the headphone jack board. Once the board has been disconnected, it will fall right out. With a flat head screwdriver, gently pry the connector from the headphone jack board. Once the board has been disconnected, it will fall right out.
Remove 3.5mm headphone jack
  • In the bottom left corner of the HMD, you'll find the audio jack and the board attached to it.

  • With a flat head screwdriver, gently pry the connector from the headphone jack board. Once the board has been disconnected, it will fall right out.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.