Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 6
As the 6 series is slightly higher we need to make a little space on the plastic holder which is beneath the card Remove the plastic part which is shown on the 2nd picture by removing one screw and carefully pull it from the aluminium case Its fastended with tape, so don't worry, you can't break anything
  • As the 6 series is slightly higher we need to make a little space on the plastic holder which is beneath the card

  • Remove the plastic part which is shown on the 2nd picture by removing one screw and carefully pull it from the aluminium case

  • Its fastended with tape, so don't worry, you can't break anything

  • Some wiggling and navigating it from the cables and you should have it in your hands

  • You see the rectangular space where the large cable goes through. Use a saw or other tool to make it about 5mm wider and 2-3mm deeper

  • The third image shows the final result we want to achieve

  • The primary reason for thi step is the heatpipe of the 6 series which takes more space

  • Note: this is ONLY necessary on the late 2009 model, 2010 models already got enough room!

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.