Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 2
Now remove these 3 T9 Torx screws from the graphics card bezel. Locate the large heatsink from the graphics card, which should be right above your DvD drive
  • Now remove these 3 T9 Torx screws from the graphics card bezel.

  • Locate the large heatsink from the graphics card, which should be right above your DvD drive

  • Remove the single screw there holding it in place

  • Carefully remove the graphics card temperature sensor cable from underneath the motherboard

  • Remember the position as you need to plugin the new one here as well

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.