Ga door naar hoofdinhoud

Stap 4 vertalen

Step 4
Remove the four T10 Torx screws securing the power supply to the rear case. The fine-thread screw belongs in the lower right corner of the power supply. When reinstalling the power supply, install the fine-threaded screw first.
  • Remove the four T10 Torx screws securing the power supply to the rear case.

  • The fine-thread screw belongs in the lower right corner of the power supply. When reinstalling the power supply, install the fine-threaded screw first.

  • Lift the power supply out of the rear case, minding the AC-in cable that may get caught.

  • Do not touch the face of the power supply board to avoid electric shock.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.