Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
Remove the two T6 Torx screws securing the AirPort/Bluetooth board to the logic board. Lift the AirPort/Bluetooth board up from its left edge to separate it from its socket on the logic board.
  • Remove the two T6 Torx screws securing the AirPort/Bluetooth board to the logic board.

  • Lift the AirPort/Bluetooth board up from its left edge to separate it from its socket on the logic board.

  • Lift the AirPort/Bluetooth board from its left edge only. Trying to lift from its right edge may break the socket off the logic board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.