Ga door naar hoofdinhoud

iPad Pro 10.5インチの分解

Stap 8
iPad Pro 10.5" Teardown: stap 0, afbeelding 1 van 2 iPad Pro 10.5" Teardown: stap 0, afbeelding 2 van 2
  • Sure enough, allllllll the connecting cables are hiding out under this overturned rock speaker chamber.

  • At least the speaker chamber itself comes out intact, with the driver attached—unlike in the 12.9" Pro, this is a nondestructive process. The speaker even has little spring contacts, so it lifts out cleanly.

  • Not so for the ribbon cables that remain glued to the rear case, however.

もちろんですが、全ての接続ケーブルはスピーカーチャンバーの下に隠されています。

ついに、ドライバーを当てると、簡単にスピーカーチャンバーが外せます。これは12.9インチProモデルとは違う感覚です。破壊して取り出さなくても良いのです。スピーカーに小さなバネが付いているので、簡単に持ち上がります。

残念ながらリボンケーブルは例外です。リアケースに大量の接着剤で付けられています。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.