Ga door naar hoofdinhoud
Engels
Nederlands
Stap 6
If you fitted a new layshaft bush, check the size. It should be reamed to 0.6255-0.6260". The layshaft measures up at 0.6235", so by my reckoning that's a running clearance of at least 2 thou.
Ream the layshaft bush to size
  • If you fitted a new layshaft bush, check the size. It should be reamed to 0.6255-0.6260".

  • The layshaft measures up at 0.6235", so by my reckoning that's a running clearance of at least 2 thou.

  • An adjustable H6 hand reamer (19/32" - 21/32") will do the job.

  • Don't worry too much about getting the size precisely right; just open up the bushing until the layshaft turns freely. Slightly loose is better than too tight.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.