Ga door naar hoofdinhoud
Engels
Nederlands
Stap 17
Paint a thin layer of Wellseal or similar non-setting sealant onto the mating surfaces. You can also fit a paper gasket, though it's not absolutely necessary. Fit the sleeve gear into the main bearing.
Reassemble the two gearbox halves
  • Paint a thin layer of Wellseal or similar non-setting sealant onto the mating surfaces. You can also fit a paper gasket, though it's not absolutely necessary.

  • Fit the sleeve gear into the main bearing.

  • Fit the two halves together. This will require a bit of jiggling to align the various shafts; whatever you do, don't use force.

  • At this point, it's a good idea to check that the shafts rotate freely and the gear selector works .

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.