Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands

Stap 1 vertalen

Stap 1
Flip the logic board over to expose the antenna on the back side. Disconnect the four coaxial connectors from the logic board and remove the antenna cable from the logic board.
  • Flip the logic board over to expose the antenna on the back side.

  • Disconnect the four coaxial connectors from the logic board and remove the antenna cable from the logic board.

  • Be careful not to touch any metal to metal contact points with your bare fingers—use tweezers or gloves. Finger oils may disrupt conductivity. If you do touch any of these components, clean them with a degreaser like windex or isopropyl alcohol before reassembly.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.