Ga door naar hoofdinhoud

Sostituzione batteria nel MacBook Pro 15" Retina Display versione fine 2013

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 11
MacBook Pro 15" Retina Display Late 2013 Battery Replacement: stap 0, afbeelding 1 van 3 MacBook Pro 15" Retina Display Late 2013 Battery Replacement: stap 0, afbeelding 2 van 3 MacBook Pro 15" Retina Display Late 2013 Battery Replacement: stap 0, afbeelding 3 van 3
  • It's time to switch sides. Remove your book or foam block and place it under the opposite side of your MacBook Pro.

  • Repeat the procedure from the prior steps to separate the two battery cells on this side:

  • Apply your adhesive remover to the elevated edge of the outer battery cell, and wait 2-3 minutes for it to penetrate.

  • Work one corner of a plastic card underneath the battery cell, and slide the card fully underneath the battery cell to separate it.

  • Do the same for the adjacent cell.

  • Leave your plastic card in place or flip the battery cells over to prevent them from re-adhering during the following steps.

È ora di invertire i lati. Rimuovi il tuo libro o il tuo blocco di espanso e mettilo sotto il lato opposto del tuo MacBook Pro.

Ripeti la procedura descritta nei passi precedenti per separare le due celle della batteria di questo lato:

Applica l'antiadesivo lungo il bordo superiore della cella della batteria esterna e attendi 2-3 minuti per lasciarlo penetrare.

Infila l'angolo di una scheda di plastica sotto la cella della batteria e falla scorrere sotto l'intera cella per separarla.

Fai la stessa cosa con la cella adiacente.

Lascia in posizione la scheda di plastica o ripiega all'esterno le celle per evitare che possano incollarsi di nuovo nel corso dei passi successivi.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.