Ga door naar hoofdinhoud
Engels
Nederlands
Stap 19
Use a spudger to loosen the cable from the bottom plate. The flat ribbon cable is pasted to the bottom plate, and the ribbon cable is soldered to the PCB. The flat ribbon cable is pasted to the bottom plate, and the ribbon cable is soldered to the PCB.
removing usb pcb
  • Use a spudger to loosen the cable from the bottom plate.

  • The flat ribbon cable is pasted to the bottom plate, and the ribbon cable is soldered to the PCB.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.