Ga door naar hoofdinhoud
Engels
Nederlands
Stap 9
Gently lift the keyboard up. Spot the thin ribbon cable attached to the connector (the connector has a plastic lid). Carefully open the lid with a spudger and slide the ribbon cable out of the connector.
removing keyboard / ribbon cable
  • Gently lift the keyboard up.

  • Spot the thin ribbon cable attached to the connector (the connector has a plastic lid).

  • Carefully open the lid with a spudger and slide the ribbon cable out of the connector.

  • Be very gently with the cable and the connector as the lid may come loose.

  • Close the lid after removing the cable so that the cable cannot fall out.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.