Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 1 vertalen

Stap 1
Unplug the white 8-wire battery connector from the motherboard  by using a spudger to push the two L-shaped indentations towards the battery. The connector is a tight fit. This process requires going back-and-forth between the two indentations and plenty of patience. The connector is a tight fit. This process requires going back-and-forth between the two indentations and plenty of patience.
  • Unplug the white 8-wire battery connector from the motherboard by using a spudger to push the two L-shaped indentations towards the battery.

  • The connector is a tight fit. This process requires going back-and-forth between the two indentations and plenty of patience.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.